Thermo-hydraulic analysis of non-Newtonian nanofluid flow in porous wavy microchannels

Authors

  • Alireza Ghasemi * Morvarid Intelligent Industrial Systems Research Group, Iran.

https://doi.org/10.48314/nna.vi.64

Abstract

In the present study, the thermo-hydraulic performance of non-Newtonian nanofluid flow inside a porous wavy microchannel was numerically investigated under different permeability conditions. The computational model was developed based on a two-dimensional steady-state laminar flow formulation using the Darcy-Brinkman approach to simulate the transport phenomena inside the porous medium. The effects of permeability on velocity distribution, temperature field, heat transfer enhancement, pressure drop, and friction characteristics were comprehensively analyzed. The numerical results demonstrated that permeability has a significant influence on both the thermal and hydrodynamic behavior of the nanofluid flow inside the porous microchannel. Increasing permeability reduced the porous resistance force and enhanced fluid circulation throughout the channel, resulting in improved convective heat transfer performance. The obtained results indicated that the average Nusselt number increased with increasing permeability due to stronger thermal mixing and thermal boundary layer disruption generated by the wavy geometry. Furthermore, the sinusoidal microchannel configuration intensified local flow disturbances and secondary vortical structures, which contributed to additional heat transfer enhancement. However, lower permeability conditions produced larger pressure drops and higher friction factors because of stronger hydrodynamic resistance effects inside the porous region. The present numerical investigation confirmed that the combined utilization of porous media, wavy microchannel geometry, and non-Newtonian nanofluids can significantly improve the thermo-hydraulic performance of compact thermal systems. The obtained findings provide useful insight for the design and optimization of advanced cooling technologies employed in microelectronic devices, compact heat exchangers, and MEMS-based thermal management systems.    

 

Keywords:

Non-Newtonian nanofluid, Porous medium, Wavy microchannel, Permeability, Pressure drop, Friction factor

References

  1. [1] Rosa, P., Karayiannis, T. G., & Collins, M. W. (2009). Single-phase heat transfer in microchannels: The importance of scaling effects. Applied Thermal Engineering, 29(17–18), 3447–3468. https://doi.org/10.1016/j.applthermaleng.2009.05.015
  2. [2] Karniadakis, G., Beskok, A., & Aluru, N. (2005). Microflows and nanoflows: Fundamentals and simulation. Springer. https://doi.org/10.1007/0-387-28676-4_15
  3. [3] McGlen, R. J., Jachuck, R., & Lin, S. (2004). Integrated thermal management techniques for high power electronic devices. Applied Thermal Engineering, 24(8–9), 1143–1156. https://doi.org/10.1016/j.applthermaleng.2003.12.029
  4. [4] International Technology Roadmap for Semiconductors (ITRS). (2005). International technology roadmap for semiconductors. https://www.semiconductors.org/wp-content/uploads/2018/08/2005Assembly-Packaging.pdf
  5. [5] Kandlikar, S. (2006). Heat transfer and fluid flow in minichannels and microchannels. Elsevier. https://doi.org/10.1016/B978-0-08-044527-4.X5000-2
  6. [6] Azizi, Z., Alamdari, A., & Malayeri, M. R. (2015). Convective heat transfer of Cu--water nanofluid in a cylindrical microchannel heat sink. Energy Conversion and Management, 101, 515–524. https://doi.org/10.1016/j.enconman.2015.05.073
  7. [7] Akbarinia, A., Abdolzadeh, M., & Laur, R. (2011). Critical investigation of heat transfer enhancement using nanofluids in microchannels with slip and non-slip flow regimes. Applied Thermal Engineering, 31(4), 556–565. https://doi.org/10.1016/j.applthermaleng.2010.10.017
  8. [8] Toh, K. C., Chen, X. Y., & Chai, J. C. (2002). Numerical computation of fluid flow and heat transfer in microchannels. International Journal of Heat and Mass Transfer, 45(26), 5133–5141. https://doi.org/10.1016/S0017-9310(02)00223-5
  9. [9] Ramiar, A., & Ranjbar, A. A. (2011). Effect of viscous dissipation and variable properties on nanofluids flow in two dimensional microchannels. International Journal of Engineering, 24(2), 131–142. https://www.ije.ir/article_71900.html
  10. [10] Amani, J., & Abbasian Arani, A. A. (2014). Experimental study on heat transfer and pressure drop of TiO2-water nanofluid. Amirkabir Journal of Mechanical Engineering, 46(1), 79-88. (In Persian). https://doi.org/10.22060/mej.2014.344
  11. [11] Zhou, Y., Zhang, R., Staroselsky, I., Chen, H., Kim, W. T., & Jhon, M. S. (2006). Simulation of micro-and nano-scale flows via the lattice Boltzmann method. Physica A: Statistical Mechanics and Its Applications, 362(1), 68–77. https://doi.org/10.1016/j.physa.2005.09.037
  12. [12] Sheikhpour, N., Lavasani, A. M., & Salehi, G. (2025). Numerical investigation of the magneto-hydraulic-thermal performance of a nanofluid in a semi-porous wavy channel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 239(5), 1766–1777. https://doi.org/10.1177/09544062241293354
  13. [13] Leondes, C. T. (2007). Mems/Nems:(1) Handbook techniques and applications design methods,(2) Fabrication techniques,(3) manufacturing methods,(4) Sensors and actuators,(5) Medical applications and MOEMS. Springer Science & Business Media. https://content.e-bookshelf.de/media/reading/L-340003-794df3f34e.pdf
  14. [14] Mehendale, S. S., Jacobi, A. M., & Shah, R. K. (2000). Fluid flow and heat transfer at micro-and meso-scales with application to heat exchanger design. Applied Mechanics Reviews, 53(7), 175–193. https://doi.org/10.1115/1.3097347
  15. [15] Anoop, K., Sadr, R., Yu, J., Kang, S., Jeon, S., & Banerjee, D. (2012). Experimental study of forced convective heat transfer of nanofluids in a microchannel. International Communications in Heat and Mass Transfer, 39(9), 1325–1330. https://doi.org/10.1016/j.icheatmasstransfer.2012.07.023
  16. [16] Xuan, Y., & Roetzel, W. (2000). Conceptions for heat transfer correlation of nanofluids. International Journal of Heat and Mass Transfer, 43(19), 3701–3707. https://doi.org/10.1016/S0017-9310(99)00369-5
  17. [17] Qu, W., & Mudawar, I. (2002). Analysis of three-dimensional heat transfer in micro-channel heat sinks. International Journal of Heat and Mass Transfer, 45(19), 3973–3985. https://doi.org/10.1016/S0017-9310(02)00101-1
  18. [18] Kroeker, C. J., Soliman, H. M., & Ormiston, S. J. (2004). Three-dimensional thermal analysis of heat sinks with circular cooling micro-channels. International Journal of Heat and Mass Transfer, 47(22), 4733–4744. https://doi.org/10.1016/j.ijheatmasstransfer.2004.05.028
  19. [19] Kou, H. S., Lee, J. J., & Chen, C. W. (2008). Optimum thermal performance of microchannel heat sink by adjusting channel width and height. International Communications in Heat and Mass Transfer, 35(5), 577–582. https://doi.org/10.1016/j.icheatmasstransfer.2007.12.002
  20. [20] Foong, A. J. L., Ramesh, N., & Chandratilleke, T. T. (2009). Laminar convective heat transfer in a microchannel with internal longitudinal fins. International Journal of Thermal Sciences, 48(10), 1908–1913. https://doi.org/10.1016/j.ijthermalsci.2009.02.015
  21. [21] Ghazvini, M., & Shokouhmand, H. (2009). Investigation of a nanofluid-cooled microchannel heat sink using Fin and porous media approaches. Energy Conversion and Management, 50(9), 2373–2380. https://doi.org/10.1016/j.enconman.2009.05.021
  22. [22] Kumar, P., Dwivedi, R., & Pandey, K. M. (2024). Hybrid-nanofluid flow through partially porous wavy channels: thermo-hydraulic performance and entropy analysis. Heat Transfer Engineering, 45(3), 211–232. https://doi.org/10.1080/01457632.2023.2185487
  23. [23] Abdollahzadehsangroudi, M., Francisco, M., Lopes, R., Dolati, F., Pascoa, J. C., & Rodrigues, F. (2024). Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance. Physics of Fluids, 36(4), 042015-1–15. https://doi.org/10.1063/5.0198294
  24. [24] Niknejad, K., Sharifzadeh Baei, M., & Motallebi Tala Tapeh, S. (2018). Synthesis of Metformin Hydrochloride nanoliposomes: Evaluation of physicochemical characteristics and release kinetics. International Journal of Nano Dimension, 9(3), 298–313. https://ijnd.tonekabon.iau.ir/article_659887.html

Downloads

Published

2026-06-09

Issue

Vol. 1 No. 2 (2026): Nano Nexus & Applications (NNA)

Section

Articles

Categories

How to Cite

Ghasemi, A. . . (2026). Thermo-hydraulic analysis of non-Newtonian nanofluid flow in porous wavy microchannels. Nano Nexus & Applications, 1(2), 82-94. https://doi.org/10.48314/nna.vi.64

Similar Articles

You may also start an advanced similarity search for this article.